It’s very important to remember that laser cutters can be extremely dangerous if laser safety rules are not followed.

　　If you are a first-time user of laser cutters, it’s essential that you’re aware of cutting hazards and cutting safety precautions associated with laser cutting.

　　Potential hazards include:

　　So to stay safe while laser cutting, it’s important to:

　　Read on below to find out more about the risks of laser cutters, dangers, hazards, laser cutter safety, and more.

　　Before getting stuck into the hazards, let’s briefly recap how they work, and why this makes them dangerous:

　　Laser cutters use a focused beam of light to cut through various materials such as wood, plastic, and metal. The high-energy beam is so concentrated that it can vaporize the material, which also makes the laser dangerous.

　　Laser safety risks commonly result from laser beams that have not been contained, poor ventilation systems, or the use of flammable materials.

　　The most common laser cutter hazards include the following:

　　Laser cutters can cause fires if the material being cut is flammable or combustible. If the laser’s energy is not properly controlled, the laser beam can ignite the material and any other combustible in close proximity.

　　This is why it is essential to use only laser cutter-safe materials on a laser bed to avoid a fire hazard. Also, you need to take special measures for some materials. Some materials, like PVC, produce flammable fumes when burned and therefore shouldn’t be laser cut.

　　When laser cut, some materials can emit laser-generated air contaminants (LGACs), which are harmful gases that can pose serious health risks when inhaled.

　　For example, PVC releases toxic gases (including chlorine) when lasered, which is highly corrosive and dangerous. You should never laser cut PVC.

　　To mitigate the risk of exposure to LGACs, be sure to use exhaust systems and air filters to capture and remove laser dust and fumes from the air. Also, good ventilation in your workspace is essential.

　　Eye damage can occur when a laser beam enters the eye and damages the retina. This can lead to retina damage, cataract, and cornea damage, depending on the wavelength. The more powerful the laser, the more dangerous it is.

　　It’s vital to know that eye damage from lasers is not just the result of direct eye contact with the laser beam. In Class 3B and Class 4 lasers, the beam is so powerful that its reflection from surfaces can enter the eye and damage it.

　　So, when working with these lasers, you must to wear laser safety glasses at all times.

　　It’s also crucial to make sure your laser is properly contained, and that all the laser’s safety features are functional. This includes interlocks that turn off the laser when the machine’s door or cover is open.

　　Laser cutters can cause severe skin burns when the laser’s high-energy light comes into contact with the skin, heating it to the point of damage or combustion.

　　The risk of skin burns is greater with more powerful lasers, and certain wavelengths that the skin better absorbs.

　　Laser cutters can cause puncture wounds when a user accidentally comes into contact with the sharp or pointed edges of the material being cut or the moving parts of the laser cutter itself.

　　While not directly related to the laser beam itself, laser cutting can create sharp or pointed edges on the material. These can potentially cause cuts or puncture wounds.

　　To prevent these accidents, it’s important to handle the cut materials with care, especially immediately after cutting, when edges can be particularly sharp.

　　Wearing appropriate personal protective equipment, such as cut-resistant gloves, provides extra protection. Also, users should always be mindful of the machine’s moving parts and keep their hands and fingers clear when the machine is operating.

　　Users should always practice laser safety every time they operate the machine. A few safety precautions are listed below:

　　Leaving laser cutters unattended during operation risks a fire breaking out from the laser igniting the material being cut. This risk is especially high if the material is flammable or you’re using the wrong laser settings.

　　Therefore, it’s key to always supervise a laser cutter while it’s operating, and to have fire safety measures in place, such as a nearby fire extinguisher.

　　When laser dust and debris accumulate around the laser cutter, they pose a serious fire hazard. These particles can ignite if they come into contact with the laser beam or the heat it generates.

　　This debris can also affect the machine’s operation and potentially cause damage or wear.

　　Therefore, it’s important to regularly clean your workspace and your machine itself, especially the cutting bed and the area around the laser. This’ll also improve your laser’s longevity and better maintain performance.

　　An efficient exhaust system also helps remove dust and fumes from the cutting area, improving air quality when working and reducing fire risk.

　　Eye contact with a laser-cutting beam can cause damage to the sensitive tissues of the eye. Even brief exposure to the laser beam can cause temporary vision impairment.

　　You must always practice laser safety by wearing safety glasses when operating your laser cutter.

　　Before using any material on a laser cutting machine, it is recommended to consult the machine’s manual and guidelines to ensure that the material is safe and suitable.

　　Materials that are safe to use generally include wood, plastics/acrylics, and metal. Materials that are not safe to use include:

　　Never disable laser interlocks built into the cutter. Interlocks are designed to shut off the laser if the cover or door of the machine is opened during operation. Disabling them could result in skin burns, eye damage, and other physical health risks.

　　A laser cutting machine will be at a greater risk of overheating and malfunctioning if it is used in a hot environment, and usually need cooling to stay safe.

　　Laser cutters need to be operated with adequate ventilation and heat management. Some laser cutters have built-in cooling systems (like water cooling for the laser tube in CO2 laser cutters) to prevent overheating.

　　However, in the same way, being too cold can also cause issues. For instance, if a water-cooled laser tube freezes, it could crack.

　　Many compatible laser materials can also be fire hazards. For example, cardboard, paper, and wood are great for laser cutting, but using too much power at low speeds can set them on fire.

　　Using air assist greatly reduces the chance of fire, by blowing heat away to prevent any combustion from the gases generated during cutting.

　　Many CO2 lasers come with air assist nowadays, but lower-cost diode laser engravers sometimes do not.

　　For me personally, I bought my own air assist upgrade for my Ortur Laser Master 3, and I bought xTool’s air assist for my xTool D1 Pro.

　　Always stay alert when operating the machine. Accidents can happen when users become too complacent and forget to be careful. By keeping focused on the task at hand, accidents can be avoided. And make sure to not leave your laser unattended for long periods of time.

　　While laser cutters are a very useful tool in many industries, they can be dangerous if laser safety practices are not followed. Users should always abide by the safety features and take care to avoid hazards such as fires, dangerous fumes, eye damage, and more.