Do not miss our current discount!

　　Endurance laser modules.

　　2.1 -> 3.5 watt -> 5.6. watt – 8 -> 8.5 watt. More power & more cutting and engraving abilities 10 watt “Invincible” -> 10 watt Delux : has an air nozzle, bigger focusing ring, laser box instead of a laser control board. 10 watt Delux -> 10 watt Plus : has a TEC cooling with an external heatsink, air compressor.

　　8.5 watt -> 8.5 watt PRO : has a metal laser box ver 2.0 with MO2 and a smaller heatsink. (Additional accessories in the package) 10 watt “Invincible” -> 10 watt PRO: has a metal laser box ver 2.0 with MO2 and polished shining aluminum housing. (Additional accessories in the package) 10 watt Plus -> 10 watt PRO PLUS : has a metal laser box ver 2.0 with MO2, a ver 2.0 air nozzle, double TEC cooling with a turbine fan. (Additional accessories in the package)

　　The heart of the Endurance lasers (10 watt models) is NICHIA 445nm powerful diodes in TO5  housing. The diodes are securely fixed (collimated) in copper or aluminum housings.

　　Either 3 elements (long focal) or G-2 (short focal) lenses can be added to the housings by way of screwing on. All Endurance lenses have labels marking the best focus achieved.

　　Endurance makes its own heatsinks with aluminum housings.

　　To spread up the generated heat we use a high-quality thermal conductive paste.

　　The laser diode requires stabilized current and very accurate voltage settings. Endurance makes its own laser controller board with a Zener diode at the end of the board.

　　The laser controller board has a TTL (PWM) that works from 3.5V-24V range wire and a DC/DC converter that allows a laser unit to operate in the range of 9-16V. All Endurance PRO versions have analog input 0-10V. The TTL allows changing the power (intensity) during the process of laser cutting/laser engraving.

　　We have developed an Endurance MO1 PCB and Mo2 PCB enabling to use of an external power supply to feed the laser when the mainboard does not have enough power. In this case, just add an Endurance MO1 PCB and get an external power source for the laser.

　　Learn more about our laser components >>>

　　An effective current stabilizing schematics preventing the diode from over-clocking.A highly effective air cooling system keeps the diode cold.A compatible mounting system allows hooking the laser to any chassis.A tuned and labeled lens to adjust the laser focus.An advanced Endurance MO1 PCB allows feeding the laser from an external power supply.An additional TTL wire enables to adjustment the power of the laser.The lightweight of the laser module reduces the momentum of inertia.

　　All Endurance lasers have similar parameters but different power output

　　Operating Voltage: 9-16V (sted – down “buck” DC/DC converters available upon request) Operating Current: 2 – 14A Cooling: active airflow (some units equipped with TEC cooling) Mount: compatible with most 3D printers and CNC mills Weight: 100-700 grams (~ 1/4 – 1.5 pounds) Wavelength: 445 nm+-2nm (blue) TTL: yes Total lifetime: 10 000 hours. Continuous operation time: 48-72 hours. Focal range with 3 element lens: 2-10 cm (1-4”). Focal range with G2 lens: 5-30 mm (0.2-1.25”)

　　Endurance has several steps while laser production:We purchase and test all components before starting an assembling process.We do metalwork: cut aluminum drill necessary holes in an aluminum housing, drill holes in a heatsink.We make our own laser driver.We make assembling: laser driver is inserted into a metal housing, laser diode inserted into a heatsink is mounted to the housing, screw fans.Final tests: we do 2-3 hours test of a final unit (measure temperature, measure power consumption, laser beam quality, power stability).

　　Unlike Endurance most Chinese diode lasers analogs with output 2 (2000 mw), 3 (3000 mw), 5 (5000 mw), 5.5 (5500 mw), 8 (8000 mw), 10 (10000 mw), 12 (12000 mw), 15 (15000 mw) watt output are not rated properly and in fact, do not have that power output.

　　Another issue is that most Chinese lasers do not work continuously and can operate only 5-15 minutes maximum and then require idle time.

　　Unlike Endurance, most Chinese companies do not provide customer support about how to connect, how to mount, etc.

　　Endurance lasers is a perfect tool for hobby and for business unlike Chinese fake lasers

　　Endurance lasers can cut up to 8-10 mm of wood/plywood and dark acrylic. Powerful Endurance lasers with 8W, 8.5W+ and 10W power output can engrave on anodized aluminum, copper, brass, stone, ceramics, and even on stainless steel.

　　All you need to know about Endurance tests of all incoming laser diodes. We test them carefully before we use them in our laser production.

　　Measuring of voltage, current, and wattage

　　Laser cutting and laser engraving for home and for businessAdvantages of Endurance lasers

　　Laser attachments and laser engraving (marking) machinesWhy do our customers buy lasers and engraving machines from Endurance?

　　Our customers installed and run our lasers on the following machines:

　　Prusa mk3s, Monoprice maker select v2, x-сarve 1000×1000, Creality 3D cr-10S cr-10,  TAZ5, CNC Shark 4HD, Robo3DR1+, Ender-3, Ender-2, Snapmaker, Tronxy x5s, Anycubic Photon, Solidoodle 2, Wanhao 4S, A large CNC machine controlled using Mach3 and an Ethernet Smooth Stepper, Ultimaker 2, CNCC Laseraxe, Monoprice maker select v2, Eleksmaker a3’s, Openbuilds Ox, Acro for laser, Tinyg controller for CNC and GRBL for laser. MPCNC, CTC flashforge replica, openbuilds ARCO, WanHao Duplicator i3, Anet A8, 3080 china cnc, Printer is a Davinci 1.0a with repetier, full size Rambo 1.3 laser, prusa i3 printer, retrofitted Bridgeport Intact milling machine and retrofitted manual to CNC 14×40 metal, Stepcraft 420, craftbot+, anycubic photon, phrozen xl, Anycubic 4max, ReXYZ S22, Shapeoko 3 XXL, Creality Ender 3, Home made cnc 600*400*150, Creality Ender 3, Folgertech FT-5, Tevo Little Monster, Hyper Cube, Alfawise U30 printer, Ender 3 Pro, XYZ Davinci A1.0,  Custom Delta 3D printer,  300×300 D-bot 3D printer,  OpenBuilds MiniMill with Duet electronics,  OpenBuilds C-Beam,  CREALITY ENDER 3,  Creality 10 s5, creality s10 pro,  anycubic i3 mega, 750mm X-Carve, 4ft x 4ft diy gecko g540 controller, pmdx -411 interface, mach4 software, bobcad cad program, Ultimaker 2, TRex 2, TronxyX5S, Anet A6 blue, 100 cm X 100 cm chinese laser frame with laseraxe board, creality ender 3, greetech A10M, Tronxy xy-2, Open builds lead 1010 1000 x 1000mm cnc, Edge AVID CNC Pro 48″ x 144″, Prusa MK3S with MMU2, Bibo 2. Laser, generic delta printers, Bever zero CNC building, Lulzbot TAZ 6, Ultimaker S5, Next Wave Black Diamond CNC with 4th axis, Axiom V5 Pro, WH Di3 with 32bit Marlin board, home build CoreXY, Duet2 WIfi board, Voron 2, Ender 3 pro, sain smart MX3, Openbuild Lead 1075, Ender 5pro.