Up to 8G Acceleration

　　Full AC Servo Motors make acceleration nearly instant at 8G of force with top speeds of 4,200 mm/sec on all RF models.

　　Excellent Precision

　　Linear guide rails with ball bearings offer greater precision and smoother motion, which improves print quality and longevity.

　　Lightweight Laser Head

　　A lightweight laser head contributes to less over-scanning and an overall reduction in vibration.

　　Robust Unibody

　　Most lasers employ a unibody structure where the components are bolted to a thin outer shell. However, if you have the need for speed, it's of utmost importance to make the frame as rigid as possible to stop the machine from flexing. The Redline series frame is so robust, you can even remove the entire side panel for greater accessibility when troubleshooting.

　　All-In-One Design

　　The MIRA series now joins the NOVAs with its Super Clean Pack design. Not only are the linear rails and bearing blocks enclosed, but protective curtains on the left and right side rails now prevent unwanted particles from spreading beyond your work area. Centrifugal fans have been replaced by quieter and easier to clean inline fans.

　　Modular Tube Docking Station

　　Quickly swap between higher or lower wattage tubes as needed with the Modular Tube Docking Station. This toolless design allows you to switch between various wavelengths on all models, such as 1064nm Fiber lasers. This opens up a whole new world of possibilities by vastly increasing the range of materials one can process while delivering results of the utmost quality.

　　High-Resolution Camera

　　All Aeon lasers are now equipped with built-in high-resolution cameras for precise positioning and monitoring.

　　Integrated Autofocus

　　Say goodbye to collisions and gouged material. The Aeon Redline Series has a newly designed laser head with integrated autofocus.

　　Material Pass Through

　　For the Redline Series, the design team was finally able to include an infinite front-to-back passthrough in all MIRA models!

　　Brighter Work Area

　　The already well-lit work area just got brighter with the addition of 2 more LED lights on the underside of the MIRA lid, just behind the handle. When the lid is opened, the 2 interior LEDs turn off and the overhead lights turn on to illuminate your work area, while loading material and using the camera. There is even a dimmer knob on the side of the machine for setting the mood just right.

　　Status Light

　　Aeon is renowned for its stylish and sleek appearance. The Aeon Laser logo on the front access door panel is now backlit and doubles as a functional Status Light, illuminating white when in standby, red when an error is encountered, and green while in operation, adding both form and function to an already stunning design.

　　Intuitive LCD Display

　　The most recent revision to the NOVA Keypad now makes its way to the MIRA Redline Series, which brings commonly used functions right to the surface, for reduced setup times and overall ease of use. You can even monitor water temperature, amperage (mA), air pressure (psi), and the temperature of your optics right from the vibrant 5" LCD display, for the ultimate user experience.

　　Toolless Maintenance: Tube Replacements

　　Say goodbye to painstaking tube replacements. This innovative approach allows for swapping of tubes in and out of your Aeon laser, without having to renegotiate the beam path. This means it is now feasible to keep a spare tube on the shelf or quickly swap between higher or lower wattage tubes as needed.

　　Toolless Maintenance: Mirrors

　　All mirrors are now easily accessible and can be cleaned or replaced without the use of any tools or having to recalibrate.

　　Toolless Maintenance: Lens Cartridges

　　The lens cartridges on all Redline models are now magnetic and the focal lens itself is press fit with a silicone washer, for easy access.

　　Proactive Smart Monitoring

　　All optics are now fitted with thermal sensors to record and report temperature readings to the keypad, thus eliminating the likelihood of unexpected failures. This proactive approach not only saves you from costly mistakes and downtime, it also reduces the need for frequent unwarranted cleaning. To top it off, the controller now records these readings along with ambient temperature, laser tube runtime and machine parameters, to serve as a diagnostic log in the event troubleshooting is needed.

　　Safe-Guarded Optics

　　To further reduce the need for maintenance, all optics are now fully removed from the work area, taking the Clean Pack Design to its highest potential.

　　Safe-Guarded Laser Head

　　With the laser head sealed to where no dust or debris can enter, all that remains are a series of cost effective windows, which are far easier to maintain and replace if needed.

　　Bullseye Leveling Gauge

　　Ensuring your laser is level can now be done at a glance. Both MIRAs and NOVAs are fitted with Bullseye Leveling Gauges.