X500III ProLaser Source100W130W150WSealed CO2 LaserLaser CoolingWater CooledWorking Areawithout Honeycomb or
Aluminum Grid Cutting Table 1300 x 916 mm (51 x 36 in.)with Aluminum Grid Cutting
Table 1265 x 895mm (49.8 x 35.2 in.)with Honeycomb Table 1240 x 820mm (48.8 x 32.2 in.)Max. Part Size(L x W x H) without Cutting Table 1355 x 910 x 55 mm (53.3 x 35.8 x 2.2 in.)Doors Open1355 x ∞ x 55 mm ( 53.3 x ∞ x 2.2 in. )with Honeycomb or Aluminum
Grid Cutting Table 1355 x 910 x 30mm (53.3 x 35.8 x 1.2in.)Dimensions (W x D x H)1900 x 1400 x 1200 mm (74.8 x 55.1 x 47.2 in.)DriverClosed-loop DC Servo ControlMaximum Motor Speed1.01 m/s (40 in/s)Speed ControlAdjustable from 0.1~100% (Up to 16 color-linked speed settings per job)Power ControlAdjustable from 0~100% (Up to 16 color-linked power settings per job)Engraving Capability256-level gray scale image processing capabilityDistance Accuracy0.254 mm or 0.1% of move, whichever is greaterZ-Axis MovementManualResolution (DPI)Available 125, 250, 300, 500, 600, 1000Interface10 Base-T Ethernet
USB Type-A 2.0 – For USB storage (Max. 32GB capacity, FAT file system)
USB Type-B 2.0 – For connecting with the computer Focus LensStandard 2",Optional 3"Standard 3",Optional 2"Display Panel4-line LCD panel showing current file name, total working time, laser power,
engraving speed, file(s) loaded into memory buffer, setup and diagnostic menus.SafetyClass 1 Laser Product Compliant with EN60825
Class 2 Laser Product Compliant with CDRH
2006/42/EC Machinery Directive Compliance
Class 4 Laser Product Compliant with CDRH with the optional pass-through door moduleCutting Table
Knife-shaped cutting bars with down vacuum and scrap collecting funnelFacility RequirementsOperation Voltage200-240VAC, 50/60Hz auto switching, Max.10AFume Extraction SystemExternal exhaust system with minimum flow rate 2000m3/h (CFM 1177 ft3/min) is required,
3.8kPA negative pressure (Pure-Air PA-2000FS-IQ @ 8" exhaust port)
*Speed is not equal to throughput. See dealer or visit www.GCCworld.com for more details.
Specifications are subject to change without prior notice.
*The flow rate is determined by a default fume extraction system; the flow rate may vary due to a di fferent fume extraction system.